Gear Repair Tacoma, WA — industrial gearbox rebuilds

Gear Repair Tacoma, WA

Serving Tacoma and Washington industry — deep-water port operations, pulp and paper, and heavy fabrication. 8–12 day rebuilds, 24–72 hour emergency service.

Get a quote☎ (641) 519-6270

Industrial gear repair serving Tacoma, WA

Gear repair in Tacoma, WA is shaped by what the area actually runs: deep-water port operations, pulp and paper, and heavy fabrication. That mix decides what reaches our bench — ship-to-shore crane hoist and gantry drives, paper machine gearboxes, log handling and chipper drives. Standard rebuilds ship in 8–12 business days, emergency work in 24–72 hours, at rates 18–25% below standard shop estimates, with cash buyback available on surplus and failed units.

Container crane hoist gearboxes work in salt air on a duty cycle set by vessel schedules. Corrosion and intermittent heavy lift together produce a distinctive bearing and seal wear pattern worth catching before it reaches the gears.

Every unit gets the same process regardless of where it ships from: full teardown with documented failure analysis, gear tooth inspection to AGMA tolerance, new bearings and seals throughout, housing line-boring where bores have gone out of round, gear sets recut to the original tooth data when wear has passed the point of repair, and a dynamic load test before it ships back. Text a nameplate photo to (641) 519-6270 or use the instant quote app.

What Tacoma plants send us

Crane & hoist drivesPaper mill drivesGear box repairIndustrial gear repairGear reducer repairFalkRexnordSEW-EurodriveHelical gearsPrice guideEmergency serviceSell your gearAll WashingtonAll cities

Tacoma, WA gear repair questions

Is there a gear repair shop near Tacoma, WA?
We serve Tacoma and the surrounding Washington industrial area with 8–12 business day standard turnaround and 24–72 hour emergency service, freight arranged both directions and free both ways on line-down jobs. Worth knowing: only a few hundred shops in the United States have real gear-tooth-cutting capacity, so for most plants the nearest genuine gear shop is several states away regardless of who they call. Quote on dock-to-dock time, not map distance. Call (641) 519-6270.
What gear repairs are most common around Tacoma?
Tacoma industry is built on deep-water port operations, pulp and paper, and heavy fabrication. In practice the units that reach our bench are ship-to-shore crane hoist and gantry drives, paper machine gearboxes, log handling and chipper drives. We publish repair, replacement and cash-offer pricing for all of it before teardown. Call (641) 519-6270.
How long does a gearbox rebuild take from Tacoma?
Standard rebuilds ship in 8–12 business days dock-to-dock including freight both directions. Emergency line-down work runs 24–72 hours with rush freight both ways. A new factory unit, by comparison, commonly quotes a 16–30 week lead time — which is a foundry backlog, not anything your purchasing department did wrong. Call (641) 519-6270.
What does gear box repair cost in Tacoma, WA?
Freight-included pricing is the same nationwide: small worm and helical reducers $1,000–$5,000; mid-range industrial drives $4,000–$18,000; heavy mill, kiln, crusher and dragline class $10,000–$150,000+. That runs 30–60% of new-unit cost and 18–25% below standard gear shop estimates, with published new/used/scrap numbers so you can verify the comparison rather than take our word for it. Call (641) 519-6270.
Can an obsolete gearbox from a Tacoma plant still be rebuilt?
Almost always yes, and this is the strongest argument for repair over replacement. An out-of-production case does not need a catalog to be fixed: we measure the existing gear set, generate the tooth data from the part itself, and cut replacements from that. Discontinued housings, legacy bore sizes and non-current ratios are routine. Replacement often means re-engineering the foundation and the coupled equipment. Call (641) 519-6270.
Do you buy surplus or failed gearboxes in Tacoma?
Yes — cash offers same day, pickup arranged, working or not. Plants around Tacoma regularly sell us pulled drives, MRO shelf surplus and decommissioned units. A large cast case carries real scrap value, and a rebuildable core is worth considerably more than scrap. Call (641) 519-6270 or use the instant quote app.
What information do you need to quote a Tacoma gearbox?
A nameplate photo is enough to start. Manufacturer, model and ratio give us the class of unit; a photo of the failure or a description of the symptom (noise, heat, metal in the oil, broken tooth, seal leak) tells us what the rebuild scope likely is. Text it to (641) 519-6270 and you get a three-way answer — repair price, replacement price, cash offer — usually within hours. Call (641) 519-6270.

Get a Tacoma gear repair quote or cash offer

Or call/text (641) 519-6270 — ask for Sean. Photos of the nameplate get the fastest confirmed number, or use the instant quote app.