Gear Repair Lufkin, TX — pumping unit and industrial gearbox rebuilds

Gear Repair Lufkin, TX

Serving Lufkin and East Texas — and rebuilding Lufkin-brand pumping unit reducers for operators nationwide.

Get a quote☎ (641) 519-6270

Industrial gear repair serving Lufkin, TX — and Lufkin-brand gearboxes nationwide

Lufkin, Texas sits at the center of oil and gas production, timber and paper, foundry work, and the birthplace of Lufkin Industries pumping units. That mix shapes what comes across our bench: pumping-unit (pumpjack) reducers, sawmill and planer mill drives, paper machine section drives, and foundry crane and conveyor gearboxes run in wet East Texas heat and long, unbroken duty cycles. We support East Texas plants and lease operators with gear and gearbox rebuilds — 8–12 business days standard, 24–72 hours emergency — at rates 18–25% below standard shops, plus cash buyback for surplus and failed units.

Lufkin is also a brand name, not just a city, and that matters if you landed here holding a nameplate. Lufkin Industries has built pumping units and power-transmission reducers in this town since 1902, and those gearboxes are still turning in every oil-producing basin in North America. We rebuild Lufkin-branded units — pumping unit reducers, right-angle and parallel-shaft industrial reducers, and the heavy double-reduction cases — whether your well site is ten minutes from the original plant or a thousand miles from it. Herringbone and double-helical gear sets get cut to the original tooth data, not approximated.

Every job starts with real numbers rather than a teardown ransom: we publish new, wholesale, used, and scrap pricing beside our repair quote, so a maintenance manager or pumper can defend the decision in one email. Text the nameplate photo to (641) 519-6270 or use the instant quote app and get a three-way answer — repair price, replacement price, cash offer — usually within hours.

What East Texas plants and lease operators send us

LufkinLufkin N1200CFalkDodgeNORDHerringbone gearsHelical gearsOil & gas drivesPaper mill drivesAll TexasAll equipment

Lufkin, TX gear repair questions

Is there a gear repair shop near Lufkin, TX?
Yes — we serve Lufkin, Nacogdoches, Diboll, Huntington, Center, Crockett and all of East Texas, with nationwide freight (free both directions on emergency jobs) and 8–12 day standard turnaround. Local pickup in the Lufkin/Angelina County area can typically be arranged within 24–48 hours. Call (641) 519-6270.
Do you repair Lufkin-brand pumping unit gearboxes?
Yes, and it is one of the most common units we rebuild. Lufkin pumping unit reducers — the double-reduction herringbone cases on conventional, Mark II and air-balanced units — are fully rebuildable: new bearings, new seals, crank shaft and slow-speed shaft inspection, and gear sets recut to original tooth data when pitting or tooth loss has gone past repair. Rebuild runs far below a replacement reducer and ships in 8–12 business days instead of a factory lead time. Call (641) 519-6270.
What gear repairs are most common around Lufkin?
East Texas is oil and gas production, timber and paper, foundry work, and the birthplace of Lufkin Industries pumping units. In practice that means pumping-unit (pumpjack) reducers, sawmill and planer mill drives, paper machine section drives, and foundry crane and conveyor gearboxes run in wet East Texas heat and long, unbroken duty cycles. Pumping unit reducers and sawmill drives are the two highest-volume repairs we see from this area. We publish repair-vs-new-vs-cash-offer pricing for all of it. Call (641) 519-6270.
My Lufkin gearbox is out of production — can it still be rebuilt?
Almost always yes, and that is the entire argument for repair over replacement. An obsolete or superseded Lufkin case does not need a catalog to be fixed: we measure the existing gear set, generate the tooth data from the part itself, and cut replacements. Discontinued housings, legacy bore sizes and non-current ratios are routine work. Replacement, by contrast, often means re-engineering the foundation. Call (641) 519-6270.
How fast can you get a gearbox from Lufkin repaired?
Standard: 8–12 business days dock-to-dock including freight. Emergency line-down or well-down: 24–72 hours with rush freight both directions. Compare that with 16–30 weeks for a new factory unit. Call (641) 519-6270.
Do you buy surplus gearboxes and pumping units in East Texas?
Yes — cash offers same day, pickup arranged, working or not. East Texas operators routinely sell us pulled pumping unit reducers, sawmill takeouts, MRO shelf surplus and decommissioned drives. Scrap value on a large cast case is real money, and a rebuildable core is worth considerably more than scrap. Call (641) 519-6270 or use the instant quote app.
What does gearbox repair cost in Lufkin, TX?
Freight-included economics are the same nationwide: small drives $1,000–$5,000, pumping unit reducers commonly $3,500–$18,000 depending on size and gear condition, heavy mill-class $10,000–$150,000+ — always 18–25% below standard shop estimates, with published new/used/scrap numbers so you can verify. Call (641) 519-6270.

Get a Lufkin gear repair quote or cash offer

Or call/text (641) 519-6270 — ask for Sean. Photos of the nameplate get the fastest confirmed number, or use the instant quote app.