Dodge Tigear-2 26Q Repair, Price & Specs
Tigear-2 worm reducer · ratios 5:1–60:1 · 0.5–5 hp. Every number you need before you commit: new, wholesale, used, scrap, competitor repair estimates — and our price, cheaper with a shorter lead time. Or sell your surplus Tigear-2 26Q for cash today.
Have this unit? Snap the nameplate for an instant quote →
Tigear-2 26Q — full price & lead-time picture
| New / retail (OEM list)new unit, factory order | $700–$1,900 |
| Wholesale / dealervolume or distributor pricing | $560–$1,560 |
| Used (tested, working)secondhand market range | $280–$1,370 |
| Scrap valueweight-based, changes daily | $10–$25 |
Researched estimates anchored to OEM list pricing and live surplus-market data; new-unit factory lead time commonly runs 16–30 weeks for comparison. Send your nameplate for a confirmed number.
Why repair your Tigear-2 26Q with us
Real numbers before teardown
Most shops quote only after your unit is in pieces on their bench. We publish the whole market — new, used, scrap, competitor repair — up front, so you negotiate from strength.
Cheaper and faster
Our network rate beats standard shop pricing by roughly 18–25% on the Tigear-2 26Q, with turnaround 2–3 days shorter — and 24–72 hour emergency rush when the line is down.
Two-way market maker
If repair isn't the smart move we say so, buy your unit for cash, and can supply a tested used replacement. No other gear shop gives you all three exits.
20+ years of industrial iron
Industrial Surplus World has bought, sold, and rebuilt Dodge equipment for decades — packaging, OEM drives are daily work, not an experiment.
About the Dodge Tigear-2 26Q
The Dodge Tigear-2 26Q is a tigear-2 worm reducer from the Torque-Arm II TA, TXT, Tigear-2, Quantis line, rated 0.5–5 hp across ratios of 5:1–60:1, and most commonly found on packaging, OEM. Dodge (ABB/RBC) Torque-Arm TA/TXT shaft-mount reducers own American bulk-handling conveyors; Tigear-2 worm and Quantis inline/RHB round out the line.
When a Tigear-2 26Q fails, the real decision is economic: a new unit lists at $700–$1,900 with a 16–30 week factory queue, a tested used unit trades at $280–$1,370 when you can find one, and a standard shop rebuild runs $320–$1,140 over 10–15 business days. Our in-house network rate of $250–$930 in 8–12 business days beats all of those paths on total cost of downtime — and if the unit is beyond economic repair, its scrap weight alone is worth $10–$25, while we'll pay $30–$330 for the core as-is.
Typical failure modes on this family are bearing wear, shaft-seal leakage, and tooth-surface distress from degraded or contaminated oil. A correct rebuild means full teardown, hot-tank cleaning, magnetic-particle inspection of all gearing, verification of bearing-bore tolerances, all-new bearings, seals, shims and gaskets, reassembly to factory clearances, and a loaded run-test with warranty up to 24 months. Done right, it restores full service life at a fraction of replacement cost.
Dodge Tigear-2 26Q specifications
| Brand / line | Dodge — Torque-Arm II TA, TXT, Tigear-2, Quantis |
| Model / part number | Tigear-2 26Q |
| Type | Tigear-2 worm reducer |
| Nominal ratios | 5:1–60:1 |
| Power / duty | 0.5–5 hp |
| Approx. weight | 65 lb |
| Typical applications | packaging, OEM |
| Manufacturer base | Greenville, SC |
Confirm exact ratio and rating from your nameplate — we service and buy all configurations of the Tigear-2 26Q.
What a Tigear-2 26Q rebuild includes
Teardown & clean
Full disassembly, hot-tank strip, oil passages cleared.
Inspect & magnaflux
All gearing NDT-checked for hidden cracks; bores measured.
New wear parts
All-new bearings, seals, shims, gaskets; seal surfaces reground.
Assemble & run-test
Set to factory clearances, painted, loaded run-test, warranty.