Dodge TA4207 Repair, Price & Specs
Torque-Arm II shaft mount · ratios 15:1/25:1 · 7.5–40 hp. Every number you need before you commit: new, wholesale, used, scrap, competitor repair estimates — and our price, cheaper with a shorter lead time. Or sell your surplus TA4207 for cash today.
Have this unit? Snap the nameplate for an instant quote →
TA4207 — full price & lead-time picture
| New / retail (OEM list)new unit, factory order | $2,300–$5,400 |
| Wholesale / dealervolume or distributor pricing | $1,840–$4,400 |
| Used (tested, working)secondhand market range | $920–$3,900 |
| Scrap valueweight-based, changes daily | $27–$68 |
Researched estimates anchored to OEM list pricing and live surplus-market data; new-unit factory lead time commonly runs 16–30 weeks for comparison. Send your nameplate for a confirmed number.
Why repair your TA4207 with us
Real numbers before teardown
Most shops quote only after your unit is in pieces on their bench. We publish the whole market — new, used, scrap, competitor repair — up front, so you negotiate from strength.
Cheaper and faster
Our network rate beats standard shop pricing by roughly 18–25% on the TA4207, with turnaround 2–3 days shorter — and 24–72 hour emergency rush when the line is down.
Two-way market maker
If repair isn't the smart move we say so, buy your unit for cash, and can supply a tested used replacement. No other gear shop gives you all three exits.
20+ years of industrial iron
Industrial Surplus World has bought, sold, and rebuilt Dodge equipment for decades — aggregate conveyors drives are daily work, not an experiment.
About the Dodge TA4207
The Dodge TA4207 is a torque-arm ii shaft mount from the Torque-Arm II TA, TXT, Tigear-2, Quantis line, rated 7.5–40 hp across ratios of 15:1/25:1, and most commonly found on aggregate conveyors. Dodge (ABB/RBC) Torque-Arm TA/TXT shaft-mount reducers own American bulk-handling conveyors; Tigear-2 worm and Quantis inline/RHB round out the line.
When a TA4207 fails, the real decision is economic: a new unit lists at $2,300–$5,400 with a 16–30 week factory queue, a tested used unit trades at $920–$3,900 when you can find one, and a standard shop rebuild runs $1,060–$3,200 over 10–15 business days. Our in-house network rate of $830–$2,620 in 8–12 business days beats all of those paths on total cost of downtime — and if the unit is beyond economic repair, its scrap weight alone is worth $27–$68, while we'll pay $110–$940 for the core as-is.
Typical failure modes on this family are bearing wear, shaft-seal leakage, and tooth-surface distress from degraded or contaminated oil. A correct rebuild means full teardown, hot-tank cleaning, magnetic-particle inspection of all gearing, verification of bearing-bore tolerances, all-new bearings, seals, shims and gaskets, reassembly to factory clearances, and a loaded run-test with warranty up to 24 months. Done right, it restores full service life at a fraction of replacement cost.
Dodge TA4207 specifications
| Brand / line | Dodge — Torque-Arm II TA, TXT, Tigear-2, Quantis |
| Model / part number | TA4207 |
| Type | Torque-Arm II shaft mount |
| Nominal ratios | 15:1/25:1 |
| Power / duty | 7.5–40 hp |
| Approx. weight | 310 lb |
| Typical applications | aggregate conveyors |
| Manufacturer base | Greenville, SC |
Confirm exact ratio and rating from your nameplate — we service and buy all configurations of the TA4207.
What a TA4207 rebuild includes
Teardown & clean
Full disassembly, hot-tank strip, oil passages cleared.
Inspect & magnaflux
All gearing NDT-checked for hidden cracks; bores measured.
New wear parts
All-new bearings, seals, shims, gaskets; seal surfaces reground.
Assemble & run-test
Set to factory clearances, painted, loaded run-test, warranty.