Falk Steelflex Grid Coupling 1090T Repair, Price & Specs
Grid flexible coupling · ratios size 1090 · to 600 hp. Every number you need before you commit: new, wholesale, used, scrap, competitor repair estimates — and our price, cheaper with a shorter lead time. Or sell your surplus Steelflex Grid Coupling 1090T for cash today.
Have this unit? Snap the nameplate for an instant quote →
Steelflex Grid Coupling 1090T — full price & lead-time picture
| New / retail (OEM list)new unit, factory order | $1,400–$3,800 |
| Wholesale / dealervolume or distributor pricing | $1,120–$3,100 |
| Used (tested, working)secondhand market range | $560–$2,740 |
| Scrap valueweight-based, changes daily | $10–$26 |
Researched estimates anchored to OEM list pricing and live surplus-market data; new-unit factory lead time commonly runs 16–30 weeks for comparison. Send your nameplate for a confirmed number.
Why repair your Steelflex Grid Coupling 1090T with us
Real numbers before teardown
Most shops quote only after your unit is in pieces on their bench. We publish the whole market — new, used, scrap, competitor repair — up front, so you negotiate from strength.
Cheaper and faster
Our network rate beats standard shop pricing by roughly 18–25% on the Steelflex Grid Coupling 1090T, with turnaround 2–3 days shorter — and 24–72 hour emergency rush when the line is down.
Two-way market maker
If repair isn't the smart move we say so, buy your unit for cash, and can supply a tested used replacement. No other gear shop gives you all three exits.
20+ years of industrial iron
Industrial Surplus World has bought, sold, and rebuilt Falk equipment for decades — motor-gearbox connections drives are daily work, not an experiment.
About the Falk Steelflex Grid Coupling 1090T
The Falk Steelflex Grid Coupling 1090T is a grid flexible coupling from the Y-Series 2000/1000, Quadrive 5000, Omnibox, Ultramax, Ultramite line, rated to 600 hp across ratios of size 1090, and most commonly found on motor-gearbox connections. Falk (Milwaukee, since 1892, now Rexnord) is the most common industrial gearbox nameplate in North America — Y-Series parallel shaft, Quadrive shaft-mount, Omnibox worm, Ultramite and Ultramax lines drive conveyors, mixers, crushers, and mills everywhere.
When a Steelflex Grid Coupling 1090T fails, the real decision is economic: a new unit lists at $1,400–$3,800 with a 16–30 week factory queue, a tested used unit trades at $560–$2,740 when you can find one, and a standard shop rebuild runs $640–$2,280 over 10–15 business days. Our in-house network rate of $500–$1,870 in 8–12 business days beats all of those paths on total cost of downtime — and if the unit is beyond economic repair, its scrap weight alone is worth $10–$26, while we'll pay $70–$660 for the core as-is.
Typical failure modes on this family are bearing wear, shaft-seal leakage, and tooth-surface distress from degraded or contaminated oil. A correct rebuild means full teardown, hot-tank cleaning, magnetic-particle inspection of all gearing, verification of bearing-bore tolerances, all-new bearings, seals, shims and gaskets, reassembly to factory clearances, and a loaded run-test with warranty up to 24 months. Done right, it restores full service life at a fraction of replacement cost.
Falk Steelflex Grid Coupling 1090T specifications
| Brand / line | Falk — Y-Series 2000/1000, Quadrive 5000, Omnibox, Ultramax, Ultramite |
| Model / part number | Steelflex Grid Coupling 1090T |
| Type | Grid flexible coupling |
| Nominal ratios | size 1090 |
| Power / duty | to 600 hp |
| Approx. weight | 120 lb |
| Typical applications | motor-gearbox connections |
| Manufacturer base | Milwaukee, WI — now part of Rexnord |
Confirm exact ratio and rating from your nameplate — we service and buy all configurations of the Steelflex Grid Coupling 1090T.
What a Steelflex Grid Coupling 1090T rebuild includes
Teardown & clean
Full disassembly, hot-tank strip, oil passages cleared.
Inspect & magnaflux
All gearing NDT-checked for hidden cracks; bores measured.
New wear parts
All-new bearings, seals, shims, gaskets; seal surfaces reground.
Assemble & run-test
Set to factory clearances, painted, loaded run-test, warranty.