Falk 1030Y1 Repair, Price & Specs
Parallel-shaft helical, single reduction · ratios 1.84–8.75:1 · 1–15 hp. Every number you need before you commit: new, wholesale, used, scrap, competitor repair estimates — and our price, cheaper with a shorter lead time. Or sell your surplus 1030Y1 for cash today.
Have this unit? Snap the nameplate for an instant quote →
1030Y1 — full price & lead-time picture
| New / retail (OEM list)new unit, factory order | $2,200–$5,200 |
| Wholesale / dealervolume or distributor pricing | $1,760–$4,300 |
| Used (tested, working)secondhand market range | $880–$3,700 |
| Scrap valueweight-based, changes daily | $16–$39 |
Researched estimates anchored to OEM list pricing and live surplus-market data; new-unit factory lead time commonly runs 16–30 weeks for comparison. Send your nameplate for a confirmed number.
Why repair your 1030Y1 with us
Real numbers before teardown
Most shops quote only after your unit is in pieces on their bench. We publish the whole market — new, used, scrap, competitor repair — up front, so you negotiate from strength.
Cheaper and faster
Our network rate beats standard shop pricing by roughly 18–25% on the 1030Y1, with turnaround 2–3 days shorter — and 24–72 hour emergency rush when the line is down.
Two-way market maker
If repair isn't the smart move we say so, buy your unit for cash, and can supply a tested used replacement. No other gear shop gives you all three exits.
20+ years of industrial iron
Industrial Surplus World has bought, sold, and rebuilt Falk equipment for decades — conveyors, feeders drives are daily work, not an experiment.
About the Falk 1030Y1
The Falk 1030Y1 is a parallel-shaft helical, single reduction from the Y-Series 2000/1000, Quadrive 5000, Omnibox, Ultramax, Ultramite line, rated 1–15 hp across ratios of 1.84–8.75:1, and most commonly found on conveyors, feeders. Falk (Milwaukee, since 1892, now Rexnord) is the most common industrial gearbox nameplate in North America — Y-Series parallel shaft, Quadrive shaft-mount, Omnibox worm, Ultramite and Ultramax lines drive conveyors, mixers, crushers, and mills everywhere.
When a 1030Y1 fails, the real decision is economic: a new unit lists at $2,200–$5,200 with a 16–30 week factory queue, a tested used unit trades at $880–$3,700 when you can find one, and a standard shop rebuild runs $1,010–$3,100 over 10–15 business days. Our in-house network rate of $790–$2,540 in 8–12 business days beats all of those paths on total cost of downtime — and if the unit is beyond economic repair, its scrap weight alone is worth $16–$39, while we'll pay $110–$890 for the core as-is.
Typical failure modes on this family are bearing wear, shaft-seal leakage, and tooth-surface distress from degraded or contaminated oil. A correct rebuild means full teardown, hot-tank cleaning, magnetic-particle inspection of all gearing, verification of bearing-bore tolerances, all-new bearings, seals, shims and gaskets, reassembly to factory clearances, and a loaded run-test with warranty up to 24 months. Done right, it restores full service life at a fraction of replacement cost.
Falk 1030Y1 specifications
| Brand / line | Falk — Y-Series 2000/1000, Quadrive 5000, Omnibox, Ultramax, Ultramite |
| Model / part number | 1030Y1 |
| Type | Parallel-shaft helical, single reduction |
| Nominal ratios | 1.84–8.75:1 |
| Power / duty | 1–15 hp |
| Approx. weight | 180 lb |
| Typical applications | conveyors, feeders |
| Manufacturer base | Milwaukee, WI — now part of Rexnord |
Confirm exact ratio and rating from your nameplate — we service and buy all configurations of the 1030Y1.
What a 1030Y1 rebuild includes
Teardown & clean
Full disassembly, hot-tank strip, oil passages cleared.
Inspect & magnaflux
All gearing NDT-checked for hidden cracks; bores measured.
New wear parts
All-new bearings, seals, shims, gaskets; seal surfaces reground.
Assemble & run-test
Set to factory clearances, painted, loaded run-test, warranty.