SKF 23264 Spherical Roller Repair, Price & Specs
Spherical roller bearing · ratios 320mm bore · mill/crusher duty. Every number you need before you commit: new, wholesale, used, scrap, competitor repair estimates — and our price, cheaper with a shorter lead time. Or sell your surplus 23264 Spherical Roller for cash today.
Have this unit? Snap the nameplate for an instant quote →
23264 Spherical Roller — full price & lead-time picture
| New / retail (OEM list)new unit, factory order | $4,200–$12,500 |
| Wholesale / dealervolume or distributor pricing | $3,400–$10,200 |
| Used (tested, working)secondhand market range | $1,680–$9,000 |
| Scrap valueweight-based, changes daily | $43–$105 |
Researched estimates anchored to OEM list pricing and live surplus-market data; new-unit factory lead time commonly runs 16–30 weeks for comparison. Send your nameplate for a confirmed number.
Why repair your 23264 Spherical Roller with us
Real numbers before teardown
Most shops quote only after your unit is in pieces on their bench. We publish the whole market — new, used, scrap, competitor repair — up front, so you negotiate from strength.
Cheaper and faster
Our network rate beats standard shop pricing by roughly 18–25% on the 23264 Spherical Roller, with turnaround 2–3 days shorter — and 24–72 hour emergency rush when the line is down.
Two-way market maker
If repair isn't the smart move we say so, buy your unit for cash, and can supply a tested used replacement. No other gear shop gives you all three exits.
20+ years of industrial iron
Industrial Surplus World has bought, sold, and rebuilt SKF equipment for decades — crushers, mills, fans drives are daily work, not an experiment.
About the SKF 23264 Spherical Roller
The SKF 23264 Spherical Roller is a spherical roller bearing from the Spherical, CARB, seals line, rated mill/crusher duty across ratios of 320mm bore, and most commonly found on crushers, mills, fans. SKF bearings and seals live inside every rebuild we ship; we supply, fit, and buy surplus SKF stock including large-bore spherical rollers.
When a 23264 Spherical Roller fails, the real decision is economic: a new unit lists at $4,200–$12,500 with a 16–30 week factory queue, a tested used unit trades at $1,680–$9,000 when you can find one, and a standard shop rebuild runs $1,930–$7,500 over 10–15 business days. Our in-house network rate of $1,510–$6,200 in 8–12 business days beats all of those paths on total cost of downtime — and if the unit is beyond economic repair, its scrap weight alone is worth $43–$105, while we'll pay $200–$2,160 for the core as-is.
Typical failure modes on this family are bearing wear, shaft-seal leakage, and tooth-surface distress from degraded or contaminated oil. A correct rebuild means full teardown, hot-tank cleaning, magnetic-particle inspection of all gearing, verification of bearing-bore tolerances, all-new bearings, seals, shims and gaskets, reassembly to factory clearances, and a loaded run-test with warranty up to 24 months. Done right, it restores full service life at a fraction of replacement cost.
SKF 23264 Spherical Roller specifications
| Brand / line | SKF — Spherical, CARB, seals |
| Model / part number | 23264 Spherical Roller |
| Type | Spherical roller bearing |
| Nominal ratios | 320mm bore |
| Power / duty | mill/crusher duty |
| Approx. weight | 480 lb |
| Typical applications | crushers, mills, fans |
| Manufacturer base | Lansdale, PA (US) |
Confirm exact ratio and rating from your nameplate — we service and buy all configurations of the 23264 Spherical Roller.
What a 23264 Spherical Roller rebuild includes
Teardown & clean
Full disassembly, hot-tank strip, oil passages cleared.
Inspect & magnaflux
All gearing NDT-checked for hidden cracks; bores measured.
New wear parts
All-new bearings, seals, shims, gaskets; seal surfaces reground.
Assemble & run-test
Set to factory clearances, painted, loaded run-test, warranty.