Marley Geareducer 32.2 Repair, Price & Specs
Right-angle spiral bevel cooling tower drive · ratios 1.8:1–16:1 · 40–200 hp. Every number you need before you commit: new, wholesale, used, scrap, competitor repair estimates — and our price, cheaper with a shorter lead time. Or sell your surplus Geareducer 32.2 for cash today.
Have this unit? Snap the nameplate for an instant quote →
Geareducer 32.2 — full price & lead-time picture
| New / retail (OEM list)new unit, factory order | $8,900–$21,000 |
| Wholesale / dealervolume or distributor pricing | $7,100–$17,200 |
| Used (tested, working)secondhand market range | $3,600–$15,100 |
| Scrap valueweight-based, changes daily | $85–$209 |
Researched estimates anchored to OEM list pricing and live surplus-market data; new-unit factory lead time commonly runs 16–30 weeks for comparison. Send your nameplate for a confirmed number.
Why repair your Geareducer 32.2 with us
Real numbers before teardown
Most shops quote only after your unit is in pieces on their bench. We publish the whole market — new, used, scrap, competitor repair — up front, so you negotiate from strength.
Cheaper and faster
Our network rate beats standard shop pricing by roughly 18–25% on the Geareducer 32.2, with turnaround 2–3 days shorter — and 24–72 hour emergency rush when the line is down.
Two-way market maker
If repair isn't the smart move we say so, buy your unit for cash, and can supply a tested used replacement. No other gear shop gives you all three exits.
20+ years of industrial iron
Industrial Surplus World has bought, sold, and rebuilt Marley equipment for decades — power plant cooling cells drives are daily work, not an experiment.
About the Marley Geareducer 32.2
The Marley Geareducer 32.2 is a right-angle spiral bevel cooling tower drive from the Geareducer 22/27/32/36, 3000 series line, rated 40–200 hp across ratios of 1.8:1–16:1, and most commonly found on power plant cooling cells. Marley Geareducer right-angle drives sit atop cooling towers across every US power plant and HVAC farm — 22.2/27.2/32.2/36.2 and 3000 series.
When a Geareducer 32.2 fails, the real decision is economic: a new unit lists at $8,900–$21,000 with a 16–30 week factory queue, a tested used unit trades at $3,600–$15,100 when you can find one, and a standard shop rebuild runs $4,100–$12,600 over 10–15 business days. Our in-house network rate of $3,200–$10,300 in 8–12 business days beats all of those paths on total cost of downtime — and if the unit is beyond economic repair, its scrap weight alone is worth $85–$209, while we'll pay $430–$3,600 for the core as-is.
Typical failure modes on this family are bearing wear, shaft-seal leakage, and tooth-surface distress from degraded or contaminated oil. A correct rebuild means full teardown, hot-tank cleaning, magnetic-particle inspection of all gearing, verification of bearing-bore tolerances, all-new bearings, seals, shims and gaskets, reassembly to factory clearances, and a loaded run-test with warranty up to 24 months. Done right, it restores full service life at a fraction of replacement cost.
Marley Geareducer 32.2 specifications
| Brand / line | Marley — Geareducer 22/27/32/36, 3000 series |
| Model / part number | Geareducer 32.2 |
| Type | Right-angle spiral bevel cooling tower drive |
| Nominal ratios | 1.8:1–16:1 |
| Power / duty | 40–200 hp |
| Approx. weight | 950 lb |
| Typical applications | power plant cooling cells |
| Manufacturer base | Overland Park, KS |
Confirm exact ratio and rating from your nameplate — we service and buy all configurations of the Geareducer 32.2.
What a Geareducer 32.2 rebuild includes
Teardown & clean
Full disassembly, hot-tank strip, oil passages cleared.
Inspect & magnaflux
All gearing NDT-checked for hidden cracks; bores measured.
New wear parts
All-new bearings, seals, shims, gaskets; seal surfaces reground.
Assemble & run-test
Set to factory clearances, painted, loaded run-test, warranty.