Brevini ET3045 Planetary Repair, Price & Specs
Planetary drive, 2-3 stage · ratios 10:1–250:1 · winch/slew duty. Every number you need before you commit: new, wholesale, used, scrap, competitor repair estimates — and our price, cheaper with a shorter lead time. Or sell your surplus ET3045 Planetary for cash today.
Have this unit? Snap the nameplate for an instant quote →
ET3045 Planetary — full price & lead-time picture
| New / retail (OEM list)new unit, factory order | $4,600–$12,800 |
| Wholesale / dealervolume or distributor pricing | $3,700–$10,500 |
| Used (tested, working)secondhand market range | $1,840–$9,200 |
| Scrap valueweight-based, changes daily | $43–$105 |
Researched estimates anchored to OEM list pricing and live surplus-market data; new-unit factory lead time commonly runs 16–30 weeks for comparison. Send your nameplate for a confirmed number.
Why repair your ET3045 Planetary with us
Real numbers before teardown
Most shops quote only after your unit is in pieces on their bench. We publish the whole market — new, used, scrap, competitor repair — up front, so you negotiate from strength.
Cheaper and faster
Our network rate beats standard shop pricing by roughly 18–25% on the ET3045 Planetary, with turnaround 2–3 days shorter — and 24–72 hour emergency rush when the line is down.
Two-way market maker
If repair isn't the smart move we say so, buy your unit for cash, and can supply a tested used replacement. No other gear shop gives you all three exits.
20+ years of industrial iron
Industrial Surplus World has bought, sold, and rebuilt Brevini equipment for decades — winches, cranes, dredges drives are daily work, not an experiment.
About the Brevini ET3045 Planetary
The Brevini ET3045 Planetary is a planetary drive, 2-3 stage from the ET/EQ planetary, PWD winch drives line, rated winch/slew duty across ratios of 10:1–250:1, and most commonly found on winches, cranes, dredges. Brevini (Dana) planetary drives power winches, slewing rings, and mobile equipment — ET/EQ series planetary stages rebuilt with genuine-spec parts.
When a ET3045 Planetary fails, the real decision is economic: a new unit lists at $4,600–$12,800 with a 16–30 week factory queue, a tested used unit trades at $1,840–$9,200 when you can find one, and a standard shop rebuild runs $2,120–$7,700 over 10–15 business days. Our in-house network rate of $1,650–$6,300 in 8–12 business days beats all of those paths on total cost of downtime — and if the unit is beyond economic repair, its scrap weight alone is worth $43–$105, while we'll pay $220–$2,210 for the core as-is.
Typical failure modes on this family are bearing wear, shaft-seal leakage, and tooth-surface distress from degraded or contaminated oil. A correct rebuild means full teardown, hot-tank cleaning, magnetic-particle inspection of all gearing, verification of bearing-bore tolerances, all-new bearings, seals, shims and gaskets, reassembly to factory clearances, and a loaded run-test with warranty up to 24 months. Done right, it restores full service life at a fraction of replacement cost.
Brevini ET3045 Planetary specifications
| Brand / line | Brevini — ET/EQ planetary, PWD winch drives |
| Model / part number | ET3045 Planetary |
| Type | Planetary drive, 2-3 stage |
| Nominal ratios | 10:1–250:1 |
| Power / duty | winch/slew duty |
| Approx. weight | 480 lb |
| Typical applications | winches, cranes, dredges |
| Manufacturer base | Yorkville, IL (US) |
Confirm exact ratio and rating from your nameplate — we service and buy all configurations of the ET3045 Planetary.
What a ET3045 Planetary rebuild includes
Teardown & clean
Full disassembly, hot-tank strip, oil passages cleared.
Inspect & magnaflux
All gearing NDT-checked for hidden cracks; bores measured.
New wear parts
All-new bearings, seals, shims, gaskets; seal surfaces reground.
Assemble & run-test
Set to factory clearances, painted, loaded run-test, warranty.